Home >

274 Racing Series Camshaft Hemi/ Ghost

$100.00

Savings: $

Choose your options:

Grinds(optional):

274-02-07

274-06-07

Small Block Cam Shaft Options(required):

Predator: Old Style with Stamped Valve Cover

Hemi Predator w/ Cast Valve Cover

GX200, 196cc, OHV (6.5 Clones), GX160's , Tilloston's, Hemi, and Predator Ghost

Product Code: 274-02-07

Qty:

Approx .274 lift and 260 duration. Square lobe design to maximize valve opening time. While meant to use with larger carbs, it actually works very good with smaller carbs by holding open the valve as long as possible with reduced lift to maximize velocity. Honda blocks may need to be clearanced to install. Dual springs recommended (37 lb will work, but will limit rpm to 7500) For, GX200, 196cc, OHV (6.5 Clones), and GX160's, Hemi Predator w/ Cast Valve Cover , Predator: Old Style with Stamped Valve Cover. See Additional Information for Grind Descriptions
This will need to be clearanced for the 224 engine

Approx .274 lift and 260 duration. Square lobe design to maximize valve opening time. While meant to use with larger carbs, it actually works very good with smaller carbs by holding open the valve as long as possible with reduced lift to maximize velocity. Honda blocks may need to be clearanced to install. Dual springs recommended (37 lb will work, but will limit rpm to 7500)

Camshaft 274-0207: Super High Torque, Use for small to medium tracks. 4500 to 7500 rpm range, 11 to 1 or higher compression ratio required

Camshaft 274-0607: 8500 RPM, 12 to 1 or higher compression ratio required, Big Track Cam, Warning - May cause traction problems. Use with 1.3 billet steel rockers for maximum power

Note: Honda Blocks may require clearancing to clear camshaft lobes