Chrome Moly, 1/4" Pushrod For GX240 to GX390.
Heavy Duty Pushrod, Significantly Stronger Than Stock! For Use With All Heavy Duty Springs & Are Capable Of 10,000+ RPM
*ALL PUSHRODS ARE SOLD INDIVIDUALLY**MUST HAVE 2 PER MOTOR*
GX240/270S:- 5.720" Stock Length, Use With Stamped Rocker Arms
- 5.260" (-.100): Use With Billet & Roller Rocker Arms
GX340/390,13/15HP Clones, 420 Predator OHV (Non-Hemi)- 6.540" Stock Length: Used With Stamped Rocker Arms
- 6.440" (-.100): Use With Billet & Roller Rocker Arms
420 Hemi Predators
- 6.900" (-.100): Use With Billet & roller Rocker Arms
- 7.000" Stock Length: Used With Stamped Rocker Arms
Kit (Cut To Length)
*A Maximum Of .75 Can Be Cut Off Of Each Side For The Ends To Fit*The Above Are Suggestions Only, Size May Vary Depending on Application*
Note: We Suggest Assembling the Motor First & Then Determining The Length of Pushrod You Need. Best Way Is To Grind A Stock Pushrod Until The Correct Geometry Is Reached, Measure It, And Then Order A Rod Closest To That Length.
