Stage 5 Steps Up To A 24MM Flatside Carb Kit, A Powerful .308 Lift Cam With A Wide Power Band And A Fully Race Prepped And Assembled Head. You Can Expect Around 20hp When This Kit Is Installed.
NOTE:This Is Not A Drop In Kit And Requires Mechanical Knowledge! Some Engines May Require Additional machining and Clearance, Especially Hemi Motors.
- Header ( Choice of 4, Note 3 Stage Is An Additional $5)
- Mikuni Style 24 mm Complete Jetted Flatside Carb Kit With a 52' Custom Throttle Cable
- 308 Dyno Hardened Cam
- Arc Billet Flywheel
- ARC Billet Rod
- Chrome Molly Push Rods
- Champion Rockers 1:1
- Side Cover Gasket
- NGK Spark Plug
- Valve Cover Seal
- Air Filter
- Head Gasket
- High Performance 18cc Honda Casting Head. Features Honda Premium Casting, High Flow Head, A 28.5 Stainless Intake Valve / 25mm Stainless Exhaust Valve, Billet Aluminum Retainers And Automotive Style Keepers, Dual 60 pound Springs, Head Milled to .050 For Extra Compression.
Addition Flywheel options available for additional cost.
Aluminum or Honda flywheel recommended. When the Governor is bypassed Or Removed, Stock flywheels are prone to failure and very DANGEROUS Note: Pictures are for reference only. See description for actual content. Parts may be different than pictures depending on which options are selected. 
